Copyright © 2016 Lih Woei & Shaper King  |  design by megaweb

CALL NOW | +886-4-2528-4431

LW-8230 

 

DEEP LOCK MORTISER

Faceplate routing can be done with square to face of door or on a 3 degree bavel-changeover time is approximately 15 seconds.​

​Features:

  • Self-centering clamp automatically compensates for different door thickness.

  • Quick change setups for different sizes and depths of mortise.

  • Easy setup of centerline for mortises.

  • Faceplate router uses no templates.

  • Length of faceplate mortise easily changes with a simple hand crank while faceplate is used to set stops.

  • Quick setup using turret, which controls width for four settings while adjustable stop is used for fine tuning the fit of the plate.

  • Programable logic controller-safety, reliability, quick trouble shooting.

  • Infinite adjustment capacity using adjustment bolts.

  • Faceplate routing can be done with square to face of door or on a 3 degree, bevel-changeover time is approximately 15 seconds.

  • Door greater than 8' - 0"

  • Cycle time varies with lock size and material type-typical cycle time is 1-1/2 minutes.

  • Minimum Order: Negotiable

利偉木工機械有限公司

Lih Woei & Shaper King

Tel: 886-4-25235406 / 886-4-25284431
Fax:886-4-25289411 / 886-4-25273423

No.78-2, Ln. 819, Sec. 2, Fengshi Rd., Fengyuan Dist., Taichung City 420, Taiwan